Washer Owner's Manual

Favorite
The Favorite cycle keypad allows the user to save different cy-
cles, selections and options for later use. Nine favorite cycles
can be saved.
1. Press the Favorite keypad. The control will display the cycle
and modifier settings for the first Favorite cycle. The 2-digit
display will switch between F1 and the cycle time for the
selected cycle.
2. Press the keypads for the desired cycle, selection and op-
tion settings.
3. Press the Favorite keypad to save the settings. The next Fa-
vorite cycle, F2, will be displayed. It can be programmed
now.
4. Press the Start/Pause or Delay Start keypad to save the
settings and start the cycle.
5. Press the Power/Cancel keypad to discard the current set-
tings and exit Favorite mode.
FLW2469N_SVG
Bulky
Use this cycle when washing bulky items such as blankets and
comforters. The cycle includes a wash tumble and two rinses.
A final spin extracts the moisture at a medium speed to main-
tain the load’s balance and minimize wear to the articles.
Quick Wash
Wash lightly soiled items on this cycle. The cycle includes a
short wash tumble followed by one rinse. The final spin ex-
tracts moisture at a high speed spin.
Sanitize with Oxi
The Sanitize with Oxi cycle has been verified to reduce 99.9%
of bacteria found in the typical household laundry load when
used with an Oxi additive in addition to detergent. In addition
there is no significant contamination transferred to later wash-
er loads.
The water temperature is set to Hot and can't be changed for
this cycle. The washer hot water supply connection must pro-
vide a minimum of 120°F to make sure the cycle is effective.
1. Follow the detergent and the Oxi product label instructions.
2. Use the amount suggested for a large, heavily soiled load.
Measure carefully.
3. Place the Oxi product directly in the bottom of the wash
basket before adding clothes.
Spin
Use this cycle to extract water from wet items. The cycle uses
the high spin.
To quickly rinse items, add the Extra Rinse Option.
Selections
The following selections can be used to modify the currently
chosen cycle. The default selections will be lit after choosing a
cycle.
Temp
Press the Temp keypad to change the cycle’s wash water tem-
perature from the default selection to Cold, Cool, Warm, or
Hot.
WARNING
Window may be hot in the Hot Wash Cycle.
W326
Spin Speed
The Spin Speed selection will change the cycle’s final spin
from the default speed to No Spin, Low, Medium, or High spin.
The spin's RPM speed depends on both the Spin Speed and
the Cycle that is selected.
NOTE: Spin speed may be limited due to out-of-balance
conditions.
Cycle
No
Spin Low Medium High
Heavy Duty 0 800 1000 1200
Whites 0 650 1000 1200
Normal Eco 0 800 1000 1200
Perm Press 0 400 650 800
Delicate 0 400 475 550
Bulky 0 400 475 550
Quick Wash 0 800 1000 1200
Sanitize
with Oxi
0 650 1000 1200
Spin 0 650 1000 1200
Soil Level
Changing the Soil Level keypad will add or subtract wash time
in the selected cycle.
Control Panel
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
12 Part No. 807493ENR1