Manual

ASSEMBLY INSTRUCTIONS
STEP 1: Remove all the components from the crate. Inspect each piece for shipping damage. If any part is damaged,
contact your dealer or delivering carrier.
Page 7
NOTE:Thislogsplitterwaspartiallyassembledatthefactory.Refertothedrawingsandpartslistshoulditbecome 
necessary to disassemble the unit for repair or replacement of parts.
ITEM NO. DESCRIPTION QTY.
1 Beam Assembly 1
2 Beam Lock Assembly 1
3 Tank Assembly 1
Tank Assembly (CA) 1
4 Tire and Wheel 2
5 Tongue Assembly 1
STEP 2: Attachthetwowheels(2)tothetankassembly(1)wheelspindlesusingthe3/4”lightatwashers(3),3/4”NF 
slotted nuts (4), 1/8” x 1-1/2” cotter pins (5) and the hub caps (6). These items are in the hardware package.
Tighten the slotted nuts and make sure the wheels rotate freely.
ITEM NO. DESCRIPTION QTY.
1 Tank Assembly 1
2 Wheel Assembly 2
3 3/4” Light Flatwasher 2
4 3/4” Slotted Nut 2
5 1/8” x 1-1/2” Cotter Pin 2
6 Hub Cap 2