SPX-81026 Spedix S250 Pro Manualv3

Display
Channels12345678
Bands: ABEFR with raceband
Long press to change to channel or band mode.
In channel mode, short press to change 12345678
In band mode, short press to change ABEFR
Specifications of VTX
Power: 200mW
Frequency: 5.8 GHz
Channels: 40 Channels, ABEFR Bands
Antenna: SMA 3dBi antenna
Power: 7-24V input
Size: 29x22x7.5mm
Weight: 8.3g
Power Consumption: 300 mA @12V MAX
Video Range: 300 meters in open area
Working Temperature: -10 to 65 Celsius degrees
Video Transmitter and OSD
！
Important: Antenna should be installed
before power on.
Ch1 CH2 CH3 CH4 CH5 CH6 CH7 CH8
A57055685566556655885590559055905
B57335752577157905809582858475866
E57255745576558055785582558455865
F5740 5760578058005820584058605880
R5658 5695573257695806584358805917
Frequency Chart
RP-SMA Connector
5.8G Hz 200mW 40 Channel Video Transmitter
OSD
The flight controller of S250 Pro is integrated with the
popular On-Screen-Display module, MWOSD. Flight
information such as voltage, horizon can be added to the
video. Those basic functions are set in factory. There is no
need to change the settings for beginners. For advanced
settings please check MWOSD tutorials available on internet
and YouTube.
Software for the OSD can be downloaded from the
following link or by scanning the bar code below:
https://github.com/ShikOfTheRa/scarab-osd