User Manual

39
such as walls, floors and other large-area non-standard light environments of
green/blue/intense light. In such environments, photographed pictures are certainly
subjected to color cast due to their impacts.
2).The video application is disordered or if you use a virtual application such as
Chromacan and use another video application, please restore the default value;
15.What’s wrong if images are subjected to geometric distortion and
deformation?
1).Please check whether a special effect mode has been set for the video software;
2).The camera provided with aberration correction capabilities is basically free of
geometric distortion and deformation; while the camera of a large wide-angle without
aberration correction capabilities would be subjected to aberration and distortion at its
edges, which is normal; please check whether the camera you purchase is the
camera with an aberration-free lens.
16.What’s wrong if remote positioning cannot be achieved?
Positioning maps need to be installed in the PC to achieve remote positioning, and
this problem has nothing to do with the camera.
17.What’s wrong if ripples are present in images?
1).Please change the voltage frequency of the camera based on local voltage
frequency (50HZ or 60HZ), so as to make it consistent with the local voltage
frequency.
2).The camera defaults to indoor mode. Please do not aim the camera at the light or
outdoor directly.