User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
July 2019 97
PLT-02931, Rev. A.1 Ethernet option
2. Make any necessary changes and click Save.
Note: You may need to confirm your administrative rights by entering a valid user name and password.
You may also need to restart the printer to save any changes. See Section 5.5.3 Changes to the
settings.
Field Description
SNMP Settings Enable or disable simple network management protocol (SNMP). Select the version you
wish to use. Available options are SNMP v1/v2c and SNMP v3. Also specify the UDP Port
Setting.
SNMP v1/v2c Enter the Read Community Name and the Write Community Name for the SNMP v1/v2c
setting.
SNMP v3 Enter the Read User Name/Write User Name, Security Level, auth-password, and
priv-password for the SNMP v3 settings.
Device Enter the Location, Contact, Encryption Algorithm, and the Authentication Method for
this device.