User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
82 July 2019
Printing preferences PLT-02931, Rev. A.1
3.4.8.2 Laminator settings
Flattener TOF offset Adjusts the position of the card when the flattener roller engages.
Job Canceling Timeout Period Slower PCs can have difficulty canceling all print jobs. Increase this value if all print
jobs do not get canceled and instead some restart printing.
Ribbon Queueing Position
Offset
Fine tunes the position of the ribbon prior to printing. Adjust if printing starts in the
previous panel or goes off into the next panel.
Mag Verify If set to 1, enables verification of encoded mag data.
Setting Description
Lam Rotator Card Position Offset Position of the card on the rotator. 1 = .0014 inches.
Lam Rotator Portrait Offset Angle of the rotator in the portrait position. 1 = 1°
Lam Rotator Landscape Offset Angle of the rotator in the landscape position. 1 = 1°
Lam Flipper Home Offset Flipper angle at the home position (plastic pinch rollers facing up). 1 = .75°
Lam Flipper Inverted Offset Flipper angle opposite the home position (rubber driver rollers facing up)
1 = .75°
Setting Description