User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
July 2019 77
PLT-02931, Rev. A.1 Printing preferences
3.4.8 Internal printer settings
Use this option for adjusting the internal printer settings. These settings have been customized for the printer
at the factory. These printer settings are HID advanced settings based on Electrically Erasable Programmable
Read-Only Memory (EEPROM).
Note: Any changes affect the settings for the firmware.
To change a setting, click the Edit Settings link. In the value column, change the numeric value in the row.
When all updates are correct, click the Save Settings link.
Field Description
Name Displays the label for each setting.
Value Displays the current value for the setting.
Default Displays the factory default value for the setting.
Min Displays the minimum value available for the setting.
Max Displays the maximum value available for the setting.
Refresh Settings Click this link to refresh the values.
Edit Settings
Save Settings
This link toggles between editing and saving. Click this link to edit the settings in the Value
column. When all updates have been made, click the link again to save your updates.