User's Guide

July 2019 73
PLT-02931, Rev. A.1 Printing preferences
Sensor/Value Shows the list of printer sensors and their default values.
Printer Display Panel Shows the current printer display. This window updates as the printer status changes.
Mechanical Tests Lists the available mechanical tests.
■ Raise the Printhead
■ Lower the Printhead
■ Home the Flipper Table
■ Ribbon Sensor Calibration (Remove Ribbon)
■ Advance the Stepper Motor (Remove Cards)
■ Reverse the Stepper Motor
■ Run Ribbon Take-up Motor (Remove Ribbon)
■ Run Ribbon Supply Motor (Remove Ribbon)
■ Run Printhead Lift Motor
■ Calibrate the Film Sensors
■ Restart the Printer
■ Cycle the Transfer Head Lift Motor
■ Run Film Supply Motor (Remove Film)
■ Run Film Take-up Motor (Remove Film)
■ Advance Laminator Steppers
■ Disengage Laminator Head
■ Home Laminator Flipper
■ Invert Laminator Flipper
■ Reverse Laminator Steppers
■ Rotate Laminator Landscape
■ Rotate Laminator Portrait
Self Tests Lists the available tests.
■ Alignment Self Test
■ Device Settings Self Test
■ Resin Self Test
■ Color Photo 1
■ Color Photo 2
■ Laminator Self Test
Run Test Click this link to run the selected mechanical or self test.
Field Description