User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
52 July 2019
Printing preferences PLT-02931, Rev. A.1
K Resin Printing This option controls where the resin black (K) panel of a full-color ribbon is printed. Resin black
text is desirable due to its sharp, saturated color. Available options are:
Dither Type:
■ Graphics
■ Photos
More Settings: This option is available when Ribbon Color is set to Auto Color or
Manual Select. This option is only available with YMC-K panel combinations. This option opens
the K Resin Printing window and provides the ability to:
■ Print black in image using K-panel resin (white background)
■ Print black in image using K-panel resin (color background)
■ Remove resin from image in selected area (keep out). See the Defined Areas option.
■ Print black in selected area of image. See the Defined Areas option.
Use K Resin to Print Black in Images: Prints black in images using K-panel resin (white or color
backgrounds) and automatically selects Print YMC under K Resin.
Print YMC under K Resin: Clear this check box to print black in image using K-panel resin
(white or color backgrounds).
YMC Black Text (Default is K): This option prints black text with YMC instead of K.
K Resin Threshold in Images: When Use K Resin to Print Black in Images is selected, this
option sets the K resin usage limit.
■ Lower limit = 1
■ Upper limit = 255
Default: Click this button to return the listed threshold to the factory setting.
Print Image
Menu option Description