User's Guide

48 July 2019
Printing preferences PLT-02931, Rev. A.1
Card Flattener This option is available only for single-sided card printing and is grayed out if a card flattener is
not detected. Available options are:
Enabled: Select this option to enable the flattener.
Advanced Settings: This option is grayed out unless the Enabled option is selected. When
selected, the Card Flattener window is displayed.
Temperature (Celsius):
■ Lower limit: -50
■ Upper limit: +50
Dwell Time (seconds per inch): Sets the Dwell Time for the flattening process.
■ Lower limit = 1 second per inch
■ Upper limit = 3 seconds per inch
Delay (Seconds): Sets the Delay for the flattening process.
■ Lower limit = 0
■ Upper limit = 15
Use Defaults Based on Selected Card Type: This option is automatically selected. Clear this
box to set the options in this window.
Note: If you select the wrong option, the incorrect dwell time and temperature may be used in
the flattening process which may result in card warping.
Device Settings
Menu option Description