User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
46 July 2019
Printing preferences PLT-02931, Rev. A.1
Select the Layout tab to set the Offset Length and Offset Width for the image placement on
the front and back of the card.
Note: If Duplexing is set to Single Sided, the Back tab is not available on this window.
Adjust the image position values by clicking the Offset Length and Offset Width adjustment
arrows. The image position changes according to the selection of portrait or landscape.
Rotate 180 Degrees: Select this option to rotate the image on the front or back 180 degrees
when printed.
Page Setup
Menu option Description