User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
44 July 2019
Printing preferences PLT-02931, Rev. A.1
3.2 Advanced menu tab
This tab allows you to select page setup options, printing options, diagnostic settings, and calibration
settings.
Page Setup
Menu option Description
Orientation Sets the card orientation. Select Portrait to print the card vertically. Select Landscape to print
horizontally.
Duplexing Note: This option is grayed out if a dual-sided module is not detected.
Single Sided: Select this option to print only on one side of the card. This includes printing on
the backside of preprinted cards that must have their magnetic stripe or smart card chip
encoded.
Dual Sided: This option is used for cards printed on both sides.