User's Guide
Table Of Contents
- FARGO HDP6600 High Definition Card Printer/Encoder User Guide
- 1 Specifications
- 2 Setup and installation
- 3 Printing preferences
- 4 HID Printer Status Monitor
- 5 Ethernet option
- 6 Troubleshooting
24 July 2019
Setup and installation PLT-02931, Rev. A.1
2.5 Installing the print ribbon
Important: Do not connect the power supply or communication cable (USB or Ethernet) at this stage.
CPI Card Group - Spectrum High Definition printers require highly specialized supplies to function properly. This
printer uses a refillable ribbon drawer. To maximize the printer durability, reliability and printed card quality,
you must use only FARGO-certified supplies. If not using FARGO-certified supplies, your warranty is void,
where not prohibited by law.
Each print ribbon includes a replaceable cleaning roller. The recommended cleaning cycle is after every 2,000
cards printed.
1. Open the printer front cover.
2. Slide out the ribbon drawer by pulling on the gray handle.