User's Guide

2 July 2019
Copyright
© 2018-2019 HID Global Corporation/ASSA ABLOY AB. All rights reserved.
This document may not be reproduced, disseminated or republished in any form without the prior written
permission of HID Global Corporation.
Trademarks
HID GLOBAL, HID, the HID Brick logo, the Chain Design, FARGO, POLYGUARD, HDP, SECUREMARK,
ULTRACARD, OMNIKEY, ICLASS SE, and ICLASS are trademarks or registered trademarks of HID Global,
ASSA ABLOY AB, or its affiliate(s) in the US and other countries and may not be used without permission. All
other trademarks, service marks, and product or service names are trademarks or registered trademarks of
their respective owners.
MIFARE is a registered trademark of NXP B.V. and is used under license.
Revision history
Contacts
For additional offices around the world, see www.hidglobal.com/contact/corporate-offices
Date Description Revision
July 2019 Added lamination feature. A.1
September 2018 Initial release. A.0
Americas and Corporate Asia Pacific
611 Center Ridge Drive
Austin, TX 78753
USA
Phone: [phone]
Fax: [phone]
19/F 625 King’s Road
North Point, Island East
Hong Kong
Phone: [phone]
Fax: [phone]
Europe, Middle East and Africa (EMEA) Brazil
Haverhill Business Park Phoenix Road
Haverhill, Suffolk CB9 7AE
England
Phone: [phone]
Fax: [phone]
Condomínio Business Center 
Av. Ermano Marchetti, 1435
Galpão A2 - CEP 05038-001
Lapa - São Paulo / SP
Brazil
Phone: [phone]
HID Global Technical Support: www.hidglobal.com/support