Instructions / Assembly

Door Jamb

Swept Wing

Handle

Steel

Strike Plate

Magnetic Latch

Capsule

#6 x 1½”

Flat Head Screw

Install140-120906

Check it out! Open and close the door a few times then step back and admire your work.

Installation is complete!

Thank you for purchasing a Woodfold door.

5 uPkeeP anD care SuggeStionS

OK! Now the door is installed, let’s review it’s love and care.

Operation/Maintenance

• For proper operation the track must be securely attached to the header, plumb and level. Vertical jambs must be perpendicu-

lar for proper operation. Use instructions for proper installation

• Do not rapidly pull or force any folding door across openings or around corners

• The hinge system may be sti initially and will gradually ease after a period of time with regular use

• During normal use of your Woodfold door watch for instances of binding during movement. If there is binding, inspect the

track for loose screws, dirt, debris and wheel alignment.

• Track may be periodically lubricated with a petroleum jelly type material. Do not use aerosol lubricants

Care/Cleaning

• Avoid exposure to excess or continued moisture

• As with all materials, exposure to light will cause fading

• Regular cleaning of the Vinyl/Acrylic/Aluminum/Veneer- use mild soapy water then dry with a soft cloth or chamois. Do NOT

use household cleaners, abrasive towels or scouring pads.

• Wood veneer doors can be treated periodically using a furniture polish/cleaner

• Acrylic/Aluminum panel doors can be treated periodically with non-abrasive anti-static cleaner to reduce dust accumulation

Center the Strike Plate on the magnet with the adhesive side out. Re-

move the protective tape from the adhesive backing and push

the door rmly shut.

When you reopen the door, the strike plate should stay, tem-

porarily stuck, in position.

Screw down the strike plate using 1½” #6 Flat head screws.

4 Magnetic latch