Manual
Table Of Contents
- Important Notes
- Notice
- Limited Warranty
- Preface
- Chapter 1 Module Overview
- Chapter 2 Installation and Wiring
- Chapter 3 Configuring the Module using Software
- Section 3.1 Configuring the System
- Section 3.2 Setting Up Tags
- Section 3.3 Editing XML Tag Information
- Section 3.4 Generating Structured Text
- Section 3.5 Using the CCW Structured Text Example
- Section 3.6 Viewing Version Information
- Section 3.7 Viewing Log Information
- Section 3.8 Upgrading the Software
- Section 3.9 Saving Changes
- Section 3.10 Reloading System Configuration
- Chapter 4 Implementing the BACnet Protocol
3-24 Chapter 3: Configuring the Module
User’s Manual Pub. 0300274-01 Rev. A.0
Confirm you wish to save the data:
To save the data, click Yes.
To cancel the data save, click No.
2. If you select Yes, the software saves the changes to the system
configuration on the module.
Section 3.10 Reloading System Configuration
To reload the system configuration from the module:
1. From the main software dialog, click Reload:
2. The software reloads the system configuration from the module into the
software.