Manual
Table Of Contents
- Important Notes
- Notice
- Limited Warranty
- Preface
- Chapter 1 Module Overview
- Chapter 2 Installation and Wiring
- Chapter 3 Configuring the Module using Software
- Section 3.1 Configuring the System
- Section 3.2 Setting Up Tags
- Section 3.3 Editing XML Tag Information
- Section 3.4 Generating Structured Text
- Section 3.5 Using the CCW Structured Text Example
- Section 3.6 Viewing Version Information
- Section 3.7 Viewing Log Information
- Section 3.8 Upgrading the Software
- Section 3.9 Saving Changes
- Section 3.10 Reloading System Configuration
- Chapter 4 Implementing the BACnet Protocol
Chapter 3: Configuring the Module 3-11
User’s Manual Pub. 0300274-01 Rev. A.0
Example. In the above Tags list, you may change:
<Name>__IO_EM_DO_00</Name>
TO
<Name>__IO_EM_DO_123</Name> manually.
3. To implement the changes, click Submit. The name changes to
__IO_EM_DO_123.
Section 3.4 Generating Structured Text
Rockwell Connected Component Workshop (CCW) software interfaces with the
BACnet module. Tag mapping is executed through CCW, which reads and writes
to the BACnet module using CCW structured text code . When you finish
mapping tags, you convert the tag information to structured text code.
1. To convert tag information to structured text code, add your tags using
the Tags dialog:
2. From the Tags dialog, click Generate Structured Text: