Manual

Chapter 1: Module Overview 1-5
User’s Manual Pub. 0300274-01 Rev. A.0
WARNING
Pour se conformer à la Directive basse tension CE,
cet équipement doit être alimenté à partir d’une
source ayant les caractéristiques suivantes: très basse
tension de sécurité (TBTS) ou très basse tension de
protection (TBTP).
Section 1.4 Parts List
Your package contains one Micro800 BACnet Communication Module,
installation screws, and one Quick Start Guide.
You can choose to wire the plug-in before inserting it into the controller, or wire
it once the module is secured in place.
WARNING
 This equipment is considered Group 1, Class
A industrial equipment according to
IEC/CISPR 11. Without appropriate
precautions, there may be difficulties with
electromagnetic compatibility in residential
and other environments due to conducted and
radiated disturbance.
 Be careful when stripping wires. Wire
fragments that fall into the controller could
cause damage. Once wiring is complete,
make sure the controller is free of all metal
fragments before removing the protective
debris strip.
 Do not wire more than 2 conductors on any
single terminal.
 If you insert or remove the plug-in module
while power is on, an electrical arc can occur.
This could cause an explosion in hazardous
location installations. Be sure that power is
removed or the area is nonhazardous before
proceeding.
 Cable length should be less than 10 meters
(30 feet).
 Do not insert or remove the plug-in module
while power is applied; otherwise, permanent
damage to equipment may occur.