User Manual
2-12 Flex™ IO Isolated Universal Input Module
User'sManualPub.0300231‐01Rev.A
Table 2-2
Input CJC Sensor
+ Chassis
Ground
- CJC
Tail
1
CJC1 C37 C38 C39 A1
CJC2 C-46 C-47 C-48 B31
1
Terminals 37, 38, and 39, and 46, 47, and 48 are for cold junction
compensation (with 38 and 47 chassis GND). Connect the tail of CJC 1 to
terminal 1 and CJC2 to terminal 31 if channels 0…3 or 0…7 are configured
for thermocouples.
Table 2-3
Channel Number
1794-TB3G and 1794-TB3GS Terminal Base Units
Signal Return (R) Input +
(IN+)
Input
(-)
I Return
(-)
0 A-0 A-1 A-2 A-3
1 A-4 A-5 A-6 A-7
2 A-8 A-9 A-10 A-11
3 A-12 A-13 A-14 A-15
4 B-17 B-18 B-19 B-20
5 B-21 B-22 B-23 B-24
6 B-25 B-26 B-27 B-28
7 B-29 B-30 B-31 B-32
1Terminals 16, 33, and 40…45 are chassis ground.
+
mV
-
+
mA
-
RTD/Resistance
2-wire
0
2
1
3-wire
Thermocouple
1
2
+
-
mV Source
1
2
mA
1
2
3
1
0
2
1
Jumper
Numbers 0, 1, 2, and 3 are wiring numbers of the
sensor used. For terminal numbers corresponding to
R, IN+, IN-, I, refer to Terminal Base Unit Wiring
Connections below.