Instruction Manual

ManualsBrandsSpectrum Controls ManualsMeasuring instruments1762sc-IF4OF4

MicroLogix™ Combo Analog Input/Output Module 24

Publication 0100161-01 Rev. B

For Technical Support

USA 440-646-6900

United Kingdom 01908 635230

Australia 1800-809-929

Brazil (55) 11 3618 8800

Europe (49) 2104 960 630



1705 132nd Ave NE

Bellevue, WA 98005 USA

Tel: 425-746-9481

Fax: 425-641-9473

Email: spectrum@spectrumcontrols.com

Web: www.spectrumcontrols.com

MicroLogix is a trademark of Rockwell Automation. Belden is a trademark of Belden, Inc.

Publication 1762sc-IF4OF4 Install Guide – February 2009

Installation Guide

MicroLogix

™

Combo Analog Input Module

(Catalog Number 1762sc-IF4OF4)

Contents

ForMoreInformation...............................................................................2

Description................................................................................................3

Installation................................................................................................4

RemovePower..........................................................................................5

Mounting...................................................................................................5

PowerRequirements................................................................................7

SystemAssembly......................................................................................8

Wiring........................................................................................................9

I/OMemoryMapping.............................................................................12

HazardousLocationConsiderations........................................................21

Environnementsdangereux....................................................................22



Summary of content (12 pages)

PAGE 1
MicroLogix™ Combo Analog Input/Output Module 24 Installation Guide MicroLogix™ Combo Analog Input Module (Catalog Number 1762sc-IF4OF4) For Technical Support Contents USA United Kingdom Australia Brazil Europe 440-646-6900 01908 635230 1800-809-929 (55) 11 3618 8800 (49) 2104 960 630 For More Information ............................................................................... 2 Description ................................................................................................
PAGE 2
MicroLogix™ Combo Analog Input/Output Module MicroLogix™ Combo Analog Input/Output Module For More Information For An overview of the MicroLogix 1200 system, including information on controllers and expansion I/O. Information on installing, wiring, and operating a MicroLogix 1200 Programmable Controller Installation guide for the MicroLogix 1200 Programmable Controller. More information on proper wiring and grounding techniques.
PAGE 3
MicroLogix™ Combo Analog Input/Output Module 22 Environnements dangereux MicroLogix™ Combo Analog Input/Output Module Description Cet équipement est conçu pour être utilisé dans des environnements de Classe 1, Division 2, Groupes A, B, C, D ou non dangereux. La mise en garde suivante s’applique à une utilisation dans des environnements dangereux. DANGER D’EXPLOSION  La substitution de composants peut rendre cet équipement impropre à une utilisation en environnement de Classe 1, Division 2.
PAGE 4
MicroLogix™ Combo Analog Input/Output Module 4 MicroLogix™ Combo Analog Input/Output Module 21 Hazardous Location Considerations Installation 1762 I/O is suitable for use in an industrial environment when installed in accordance with these instructions. Specifically, this equipment is intended for use This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D or nonhazardous locations only. The following WARNING statement applies to use in hazardous locations.
PAGE 5
MicroLogix™ Combo Analog Input/Output Module 20 Output Specifications Specification Accuracy - Voltage Outputs Accuracy - Current Outputs Output Resolution Voltage Output Current Output Differential Nonlinearity Output Ripple Output Impedance Output Load Maximum Output Inductive and Capacitive Load Output Settling Time Output Channel glitch Output Protection Output Short Ckt Protection Description System accuracy at 25° C: ± 20 mV maximum System accuracy at -20-60°C: ± 50 mV maximum System accuracy at 25
PAGE 6
MicroLogix™ Combo Analog Input/Output Module 6 19 MicroLogix™ Combo Analog Input/Output Module Specification Current Inputs Minimum Spacing Maintain spacing from enclosure walls, wireways, adjacent equipment, etc. Allow 50.8 mm (2 in.) of space on all sides for adequate ventilation, as shown Input Repeatability (at 25C) Thermocouples) Type J Type K Type N Type E Voltage Inputs Current Inputs Input Effective Resolution (25°C)3 ±10V 0-20mA Input CMRR 1762 expansion I/O may be mounted horizontally only.
PAGE 7
MicroLogix™ Combo Analog Input/Output Module Specification Hazardous Environment Class Radiated and Conducted Emissions Electrical /EMC: ESD Immunity (IEC61000-4-2) Radiated Immunity (IEC61000-4-3) Fast Transient Burst (IEC61000-4-4) Surge Immunity (IEC61000-4-5) Conducted Immunity (IEC61000-4-6) 18 MicroLogix™ Combo Analog Input/Output Module Description Class I, Division 2, Hazardous Location, Groups A, B, C, D (ISA 12.12.01, C-UL under CSA C22.2 No.
PAGE 8
MicroLogix™ Combo Analog Input/Output Module MicroLogix™ Combo Analog Input/Output Module 17 Specifications Controller ML1100 ML1200 (24pt.) ML1200 (40pt.) ML1400 Max 5V Bus Current (mA) 800 400 600 1500 Max 24V Bus Current (mA) 700 350 500 1500 Max # of IF4OF4 Modules 4 3 4 7 System Assembly The expansion I/O module is attached to the controller or another I/O module by means of a ribbon cable after mounting as shown below.
PAGE 9
16 MicroLogix™ Combo Analog Input/Output Module MicroLogix™ Combo Analog Input/Output Module This table describes the channel specific configuration registers that are individually selectable for channels 6 and 7.
PAGE 10
MicroLogix™ Combo Analog Input/Output Module 15 MicroLogix™ Combo Analog Input/Output Module Terminal Block Layout Make these bit settings To Select 7 6 5 4 4 to 20 mA 0 0 0 to 20 mA 0 1 Reserved 1 0 Channel Disabled 1 1 3 2 1 0 Input Type TC/Voltage Input Path Open Circuit (For Module)1 Temperature Scale 1 (For Module) Upscale 0 Zero 1 Deg C 0 Deg F 1 Grounding the cable shield at the module end only usually provides sufficient noise immunity.
PAGE 11
14 MicroLogix™ Combo Analog Input/Output Module MicroLogix™ Combo Analog Input/Output Module 11 This table describes the channel specific configuration registers that are individually selectable for output channels 0 through 3.
PAGE 12
MicroLogix™ Combo Analog Input/Output Module MicroLogix™ Combo Analog Input/Output Module 13 Input Data File Wire Size and Terminal Screw Torque Each terminal accepts up to two wires with the following restrictions: Wire Type Solid Stranded Wire Size Cu-90°C (194°F) Cu-90°C (194°F) #14 to #22 AWG #16 to #22 AWG Terminal Screw Torque 0.904 Nm (8 in-lbs) 0.904 Nm (8 in-lbs) For each module, slot x, words 0 through 3 contain module status information.