User guide

Chapter 7: HART Channel Configuration, Data, and Status 73
Table 7.1(Packet 0)
Tag Name Data Type
Style
Description
(If8h0 or Of8h0)Packet0
1
Packet0[8,1] NA Two dimmensional array containing
packet 0 data for all 8 channels.
(If8h0 or Of8h0)Packet0[X,0]
1,2
Packet0 NA Packet 0 data for channel X
(If8h0 or Of8h0)Packet0[X,0].HartChannelID INT BIN
Bits 0 to 3: Channel number (0 – 7).
Bit 4: Searching/Initializing HART device
Bit 5: HART communication failure or
device not found
Bit 6: Pass-through message pending
(ready)
Bit 7: Unus ed (0)
Bits 8 to 10: Packet ID
Bit 11 through 15: Unused
(If8h0 or Of8h0)Packet0[X,0].ManufacturerID SINT DEC
HART device Manufacturer ID
(If8h0 or Of8h0)Packet0[X,0].DeviceType SINT DEC
HART device type code
(If8h0 or Of8h0)Packet0[X,0].NumPreambles SINT DEC
Minimum number of preambles the device
requires .
(If8h0 or Of8h0)Packet0[X,0].UniversalCmdCode SINT DEC
HART Univers al command code
(If8h0 or Of8h0)Packet0[X,0].XmitterRev SINT DEC
HART Transmitter specific revision
(If8h0 or Of8h0)Packet0[X,0].SwRev SINT DEC
HART device software revision number
(If8h0 or Of8h0)Packet0[X,0].HwRev SINT DEC
HART device hardware revision number
(If8h0 or Of8h0)Packet0[X,0].HartFlags SINT BIN
HART flags
(If8h0 or Of8h0)Packet0[X,0].RangeUnits SINT DEC
Units code for range parameter
(If8h0 or Of8h0)Packet0[X,0].DeviceSerialNumber SINT[3] HEX
HART device ID number
(If8h0 or Of8h0)Packet0[X,0].DeviceTag SINT[8] ASCII
8 character device tag
(If8h0 or Of8h0)Packet0[X,0].DeviceDescriptor SINT[16] ASCII
1
The name in parentheses represents the module tag name (i.e. If 8h0 or Of8h0) depending on w hich module is being used.
2
X represents the module channel number (0 to 7)