Manual

12 ControlLogix

™

Universal Analog Input Module

EN 61010-1 and EN 61131-2, EN61000-6-2:2001, EN61000-6-4:2001

EN61010-1:2001

This product is intended for use in an industrial environment.

Low Voltage Directive

This product is tested to meet Council Directive 73/23/EEC Low Voltage,

by applying the safety requirements of EN 61131-2 Programmable

Controllers, Part 2 - Equipment Requirements and Tests.

For specific information required by , EN61131-2:1994 + A11:1996 +

A12:2000, see the appropriate sections in this publication, as well as the

following Allen-Bradley publications:

· Industrial Automation Wiring and Grounding Guidelines For Noise

Immunity, publication 1770-4.1

· Automation Systems Catalog, publication B111

This equipment is classified as open equipment and must be installed

(mounted) in an enclosure during operation as a means of providing safety

protection.

CAUTION

POSSIBLE EQUIPMENT OPERATION

TTENTION:TTENTION:

TTENTION:

The module is designed to support Removal

and Insertion Under Power (RIUP). However, when you remove

or insert an RTB with field-side power applied,

unintendedunintended

unintended

macmac

mac

hine motion or loss ofhine motion or loss of

hine motion or loss of

pr pr

ocess ocess

ocess

contrcontr

contr

ol can occurol can occur

ol can occur.

Exercise extreme caution when using this feature.

WARNING

The 1756sc-IF8U module is to be used only with the Allen-

Bradley 1756 ControlLogix System.