Owner's manual

Chapter 7: Testing Your Module 49
Channel Specific Errors
Note: n = channel number (0-7)
0x010(n) Preset is defined larger than rollover limit for channel (n).
0x0200 Input Range mismatch for channel pair 0 and 1.
0x0202 Input Range mismatch for channel pair 2 and 3.
0x0204 Input Range mismatch for channel pair 4 and 5.
0x0206 Input Range mismatch for channel pair 5 and 7.
0x030(n) Invalid operational mode for channel (n).
0x040(n) Invalid storage mode for channel (n).
0x050(n) Invalid input range for channel (n).
0x060(n) Invalid signal filter for channel (n).
0x070(n) RateSamplePeriod out of range for channel (n).
0x0800 Operational mode mismatch for channel pair 0 and 1.
0x0802 Operational mode mismatch for channel pair 2 and 3.
0x0804 Operational mode mismatch for channel pair 4 and 5.
0x0806 Operational mode mismatch for channel pair 6 and 7.
0x090(n) Preset too high for channel (n).
0x0A0(n) Count limit too high for channel (n).
0x0B0(n) RateSamplePeriod not divisible by 10 for channel (n).
Note: If there are multiple errors in the configuration tags only one will be
displayed at a time. Once the displayed error has been corrected, the
additional errors will be displayed upon reconnection to the module. Each
error must be resolved before a running connection will be allowed.