Owner's manual

Quantum Series 140 EHC 204 00sc 140 EHC 208 00sc

AAppendix

Specifications

This appendix lists the specifications for the Quantum counter module.

Specification Value

Data Registers 8 - 3X registers 10 - 4X registers 8 - zoom (parameter) registers

LED Indicators:

1 Green LED, Module Status The module status LED indicates the status of the power-up self-test. The LED is on

when the module is ready. Any self-test error is indicated with a blink code.

8 Green LEDs, Channel Status Each channel status LED indicates that the

corresponding channel is active.

Terminal Block 40-pin removable connector

Wire Size One 14 AWG wire or two 22 AWG wires

Backplane Interface Standard ASIC and dual port memory interface

Compatibility:

Hardware All Quantum PLC racks

SoftwareModSoft, Concept, and ProWorks

Dimensions Standard slot configuration (using a standard single-slot plastic case, and existing

shipping box)

Shipping Weight 300 g (.65 lb)

Environmental Specifications

Environmental testing is in accordance with the standards specified or in accordance with Schneider Alliance

IPA2000/3000 or equivalent. For reference see SA IAP 2000, Mechanical Environmental Specifications #043

500021, revision 1.02.

Test Description Standard Class/Limit

Mechanical:

Vibration of Unpackaged Products IEC 68-2-6 5g at 10-500 Hz per product

Shock of Unpackaged Products Operating 15 g peak acceleration, 11±1 ms pulse width

Non-operating 50 g peak acceleration, 11±1 ms peak width

Temperature/Humidity:

Operating Temperature 0 to 60°C (32 to 131 °F), min.

Storage Temperature -40 to 85 °C (-40 to 185°F)

Humidity-Temperature IEC 68-2-3 0 to 95 percent RH noncondensing at 60 °C

Altitude 2000 meters fully operational

Electrical:

Electrostatic Discharge IEC 801-2

Surge Transient Susceptibility

Radiated EMI Susceptibility IEC 801-3

Dielectric Withstand

Conducted EMI Susceptibility

Conducted Emissions CISPR 11 Class A