Owner's manual

Counter / Flow Meter Input Module
23
3Chapter
Module Configuration
This chapter includes information on the following:
• Module addressing
• Setting up the PLC configuration software (ModSoft, Concept, and SCIOCFG)
• Making bit settings for zoom (parameter) registers
• Making bit settings for 4X configuration (output) registers
• Making bit settings for 3X data and status registers
Some configuration can be performed using the ModSoft, Concept, and SCIOCFG configuration programs.
However, many configuration steps require ladder logic to be prepared for your PLC. For these cases, module
addressing details and bit settings are provided in this chapter, while programming details are included in chapter
4, Programming.