User Manual

RS485 Hand-Held Diagnostic Unit P/N 799810 55
B Accessories
➣ In this appendix…
Tilt Mount P/N 888270
page 55
Pole Mount (U-Bolt 5 inch) P/N 799225
page 55
Commissioning Kit P/N 888247
page 55
RS485 Hand-Held Diagnostic Unit P/N
799810
page 55
HART Hand-Held Diagnostic Unit P/N
888810
page 56
HART Hand-Held Harness Kit P/N 888815
page 56
USB/RS485 Harness Converter Kit P/N
794079-8
page 56
Mini Laptop Kit P/N 777820
page 56
Sunshade P/N 888263
page 56
B.1 Tilt Mount P/N 888270
The Tilt Mounting Brackets allow accurate alignment of the detector/source
for proper operation of the open path. The brackets give crude alignment of
±30° and fine alignment of ±5°.
B.2 Pole Mount (U-Bolt 5 inch) P/N 799225
The U-bolt mount is available to facilitate 5” pipe mounting.
B.3 Commissioning Kit P/N 888247
The Commissioning/Alignment Kit unit is required for commissioning and
future maintenance checks. Only one kit is required per site.
The kit includes an Alignment Telescope P/N 888210, a Magnetic Mode
Selector P/N 790285, two Function Check Filter P/N 888260-1, -2 for system
installation and periodical functional testing along with socket keys for
access to units.
B.4 RS485 Hand-Held Diagnostic Unit P/N 799810
RS485 Hand-Held diagnostic unit, fitted with harness and converter to the
quick plug connection which provides easy and economical connection, will
provide verification, status and instructions for correcting the detector’s
parameters.