User Manual

SharpEye

IR3 Flame Detector User Guide

46 Operating Instructions

B.2 Unpacking

When unpacking the fire simulator, check that the following items are

included:

 Fire Simulator with built-in batteries

 Delivery form

 Battery charger

 Optional Beam Collimator

 Storage Case

B.3 Operating Instructions

Warning: Do not open the Fire Simulator to charge the batteries

or for any other reason in a hazardous area.

CAUTION: The following test will simulate a real fire condition and may

activate the extinguishing system or other alarms. If this is not desired,

disconnect/inhibit them before the test and reconnect after the simulation.

Figure 13: Mini IR3 Detector Target Point

➣ To simulate a fire:

1 Aim the Fire Simulator towards the detector’s Target Point.