Owners manual

Step 16

Insert the supplied hose clamp

over the 4” boot. Install the air

lter assembly onto the intake

tube. Position the MAF so that

the connector points to the

wiring harness. Connect the

assembly to the intake tube.

Step 17

Secure the vibration mount and

tighten all the hose clamps. Do

not over tighten. Reconnect the

MAF sensor wiring connector.

Step 18

Gently close the hood and

check to make sure the intake

assembly does not come in

contact with the hood when

closed. Make any adjustments

if necessary.

Step 15

Carefully insert the air lter

over MAF sensor assembly and

secure with the provided hose

clamps.

Step 19

Make sure all bolts and clamps are now tight. Reconnect

the negative terminal on the battery. Start up the engine and check

for any air leaks. Afx the CARB. E.O. sticker in a prominent place

under the hood.Your installation is now complete. Periodically

check all clamps and brackets. Enjoy your Spectre Intake System.

If you have any difculties or questions regarding the installation of this intake system, contact the

Spectre Performance Technical Department by email - Tech@spectreperformance.com or by phone

1-909-673-9800 Monday thru Friday 6:00am to 2:00pm PST.

176153A

1/27/16

(909) 673-9800