Owners manual

ManualsBrandsSpectre Performance ManualsAutomotive9900 Air Intake Kit

02-06 Cadillac Escalade 5.3L V8

02-06 Cadillac Escalade 6.0L V8

02-06 Cadillac Escalade EXT 6.0L V8

03-06 Cadillac Escalade ESV 6.0L V8

02-06 Chevy Avalanche 5.3L V8

99-06 Chevy Silverado/GMC Sierra 1500 4.8L V8

2007 Chevy Silverado/GMC Sierra 1500 Classic 4.8L V8

99-06 Chevy Silverado/GMC Sierra 1500 5.3L V8

2007 Chevy Silverado/GMC Sierra 1500 Classic 5.3L V8

2007 Chevy Silverado/GMC Sierra 1500 Classic 6.0L V8

01-05 Chevy Silverado/GMC Sierra 1500HD 6.0L V8

2007 Chevy Silverado/GMC Sierra 1500 HD Classic 6.0L

V8 99-06 Chevy Silverado/GMC Sierra 2500 5.3L V8

99-06 Chevy Silverado/GMC Sierra 2500 6.0L V8

01-05 Chevy Silverado/GMC Sierra 2500HD 6.0L V8

2007 Chevy Silverado/GMC Sierra 2500 HD Classic 6.0L V8

03-06 Chevy Silverado SS 6.0L V8

2007 Chevy Silverado SS Classic 6.0L V8

00-06 Chevy Tahoe/GMC Yukon 4.8L V8

00-06 Chevy Tahoe/ Chevy Suburban 5.3L V8

00-06 GMC Yukon/GMC Yukon XL 5.3L V8

00-06 Chevy Tahoe/ Chevy Suburban 6.0L V8

01-04 GMC Yukon Denali 6.0L V8

Year/Make/Model/Engine

For lter reorders ask at the

special order counter of your

local parts store or call:

1-909-673-9800

ask for: P/N HPR9891(red lter)

Parts List

1 - Filter shield

1 - Air lter

1 - Intake tube

1 - MAF sensor adapter

1 - Rubber vibration mount

2 - M6 fender washers

2 - M6 locknuts

1 - 4” coupler

1 - 4” coupler 90°

4 - 4” hose clamps

1 - 6” hose clamp

1 - MAF adapter ring

3 - M5 allen bolts

3 - M5 at washers

3 - M5 lock nuts

Tools Required:

• 10mm socket or wrench

• 5/16” nut driver or

at blade screwdriver

• 5/32 Allen wrench

• 5/16” wrench

P/N HPR9891B (blue lter)

P/N HPR9891K (black lter)

P/N HPR9891W (white lter)

Intake Installation Instructions

P/N 9900 (red lter) - P/N 9900B (blue lter)

P/N 9900K (black lter) - P/N 9900W (white lter)

176153A

1/27/16

Summary of content (4 pages)

PAGE 1
Intake Installation Instructions P/N 9900 (red filter) - P/N 9900B (blue filter) P/N 9900K (black filter) - P/N 9900W (white filter) Year/Make/Model/Engine 02-06 Cadillac Escalade 5.3L V8 V8 99-06 Chevy Silverado/GMC Sierra 2500 5.3L V8 02-06 Cadillac Escalade 6.0L V8 99-06 Chevy Silverado/GMC Sierra 2500 6.0L V8 02-06 Cadillac Escalade EXT 6.0L V8 01-05 Chevy Silverado/GMC Sierra 2500HD 6.0L V8 03-06 Cadillac Escalade ESV 6.0L V8 2007 Chevy Silverado/GMC Sierra 2500 HD Classic 6.
PAGE 2
Step 1 Step 2 Safety First! Before you begin, Start by loosening the clamps securing the OE intake tube to the disconnect the negative terminal on throttle body and the MAF sensor your battery. Verify all components listed are present before beginning your installation. Step 3 Remove the OE intake assembly out of the engine. Step 4 Disconnect the MAF sensor. Step 5 Grab the air box from both sides and pull up and out.
PAGE 3
Step 9 Place the rubber vibration mount, fender washers and M6 lock nuts on the side of the housing as shown. Do not tighten the bolts at this time. Step 10 Slide the 4” angled coupler and two 4” hose clamps over the throttle body. Do not tighten the clamps at this time. Step 11 Place the intake tube in the engine compartment. Slide the lower angled bracket between the vibration mount and the housing. Step 13 Install the adapter ring onto the MAF as shown.
PAGE 4
Step 15 Carefully insert the air filter over MAF sensor assembly and secure with the provided hose clamps. Step 18 Gently close the hood and check to make sure the intake assembly does not come in contact with the hood when closed. Make any adjustments if necessary. Step 16 Insert the supplied hose clamp over the 4” boot. Install the air filter assembly onto the intake tube. Position the MAF so that the connector points to the wiring harness. Connect the assembly to the intake tube.