Owners manual

www.spectreperformance.com © 2017 SPECTRE PERFORMANCE Made in China
176316
5/2/2017
Installation Instructions
If you need any assistance please call 1-800-858-3333 to
speak with a representative in our Customer Service Center
before returning the product.
P/N 42780 (chrome) - P/N 42780G (bronze)
P/N 42780K (black) - P/N 42780S (silver)
42737
Step 1
Before you permanently install the cover, place it onto the factory fuse box lid to ensure proper t
and alignment.
Step 2
Then clean the top of the factory fuse box lid with alcohol to remove any dirt, oil or contaminants.
Step 3
Peel the backing lm o the double sided tape. Place the lid cover onto the fuse box lid making sure
it aligns properly and press rmly to set.
42739
Step 1
Clean the top of the factory Brake Fluid Cap Cover with alcohol to remove any dirt oil
or contaminants.
Step 2
Peel the backing lm o the double sided tape. Place the cap cover onto the factory cap and press
rmly to set.
Step 3
For all other Cap Covers, place the cap cover onto the factory cap and press rmly to
install until the tabs engage fully around the stock cap.
42751
Step 1
Place one half of the handle cover on each side of the factory dipstick handle, then press rmly
together until the cover clamps into place.
42753
Step 1
Remove the factory brake uid reservoir cap.
Step 2
Place the rear of the cover onto the uid reservoir and press down to engage the tabs onto the rear
of the reservoir then press down on the front of the cover to engage the front tab onto the front of the
reservoir.
ATTENTION: Do not use harsh chemicals to clean covers.