User's Guide

Table Of Contents
User Guide for the Envoy Data Link
Document Number: UG-15000 Rev. A Page 42 of 173
Figure 3-9 ATC ROUTE REQ ATN (left) and FANS (right)
This page contains mutually exclusive inputs. When any one of the following parameters is
entered, the other two parameters are disabled:
DIRECT TO
OFFSET
HEADING (FANS only)
The optional Selection list DUE TO can be used with any of these three mutually exclusive inputs.
This page generates a downlink that displays on a VERIFY page for aircrew review prior to
sending.
Table 3-7 ATC ROUTE REQ Fields
LSK
Label
Description
L1
DIRECT TO
Required or disabled. Acceptable input:
FIX (4 or 5 alphanumeric characters)
NAVAID (3 to 5 numeric or alphanumeric, 3 alpha followed by NB)
LAT/LON FANS only. Examples:
o 5275N = N 52 00/W 075 00
o 5020S = S 50 00/E 020 00
o 5020E = N 50 00/E 020 00
Airport ID (4 alpha characters)
L3
OFFSET
Required or disabled. LNN or RNN, left or right, where NN is 1 to 99 NM, inclusive
R1
DUE TO
Optional. Selection list used to justify any of the other three parameters:
<blank> (default)
WEATHER
PERF
R3
HEADING
FANS only. Required or disabled. Degrees format:
Degrees magnetic (default)
Degrees true (a numeric followed by T)
R6
VERIFY
When required data is entered, VERIFY prompt appears.
VERIFICATION PAGE has an optional free text field to add a statement to justify the request.
This page formats a request that must be verified before it is sent. See the common verification
procedure described in Sec 3.4.3.2.
D-ATIS REQUEST
The D-ATIS REQ is available in an active FANS CPDLC session when ACARS is a configured
feature.