User's Guide

User Guide for the Envoy Data Link
Document Number: UG-15000 Rev. A Page 103 of 173
6.5 SYS CONFIG
SYS CONFIG pages are a read-only summary of configuration details. Each page can be printed
on an individual page basis:
Label
Section
Description
UNIT CONFIG 1/3
6.5.1
Identifies part number, enabled functionality, and customer specific
configuration information for the unit
UNIT SOFTWARE 2/3
6.5.2
Bootloader and application versions and CRCs
AIRCRAFT CONFIG 3/3
6.5.3
Aircraft and TSAP database identifiers and NSAP address
6.5.1 UNIT CONFIG 1/3
The UNIT CONFIG page displays the unit configuration identifiers, including the Envoy part
number, configured functionality, as described in Section 1.4, and software version identifiers.
Figure 6-18 UNIT CONFIG 1/3
PART NO
P/N of the Envoy unit identifies factory-enabled Envoy features (see Section 1.4 Configuration
Options for Envoy)
BOM REV
Revision number on the Bill of Materials for the current unit
FUNC
Text version of the Configuration Options for the Envoy
SER
Serial number of unit, also appears on the label on the side of the LRU
CUST CFG
Part number of customer configuration
CFG VER
Version number of customer configuration
Label
Description