Operation Manual

E-8
4
Store Number
Store a telephone number to the phone book
5
Name Recording
Record a name for a telephone number in the phone book
6
Record Message
Record a new emergency message
7
Check Message
Listen to the recorded emergency message
8
Flash
Set the flash time.
Options are: 600, 300 (default), 270, 100 and 80ms
9
Tone/Pulse
Set the dialing mode between tone or pulse.
0
Remote Pendant
For pairing the remote pendant with your telephone (up to 5 remote
pendants can be paired)
SETTING THE CONTRAST OF THE LCD DISPLAY
1. Press the MENU BUTTON. The display shows “LCD CONTRAST”.
2. Press the DIAL BUTTON. The display shows the current contrast setting with values between 1 and 5.
3. Press  or  to select the desired contrast level and confirm with the DIAL BUTTON.
4. The display now shows to “ENTER TIME/DATE”, you can refer to next section to set the time and date or
press
button to exit the setup mode.
SETTING THE TIME AND DATE
1. Press MENU BUTTON repeatedly (or press MENU then
 buttons) until “ENTER TIME/DATE” is shown.
2. Press the DIAL BUTTON. The display shows “ENTER TIME” and the hour digits are flashing.
3. Select the correct hour using the  or  and confirm with the DIAL BUTTON. The minute digits will now
flash in the display.
4. Select the required minutes using the  or  and confirm with the DIAL BUTTON. The display now shows
“ENTER DATE” and the “month” digits are flashing.
5. Select the correct month using the  or  and confirm with the DIAL BUTTON. The “date” digits will now
flash in the display.
6. Select the correct date using the  or  and confirm with DIAL BUTTON.
7. Press
BUTTON to exit the setup mode.
SETTING THE DISPLAY LANGUAGE
1. Press MENU BUTTON repeatedly (or press MENU then
 buttons) until “LANGUAGE” is shown.
2. Press the DIAL BUTTON.
3. Select the desired display language from 11 options English, Spanish, French, Italian, German, Dutch,
Turkish, Slovenski, Portuguese, Swedish and Danish using the  or  and confirm with the DIAL BUTTON.
4. Press
BUTTON to exit the setup mode.
SETTING THE VOICE PROMPT LANGUAGE
The telephone is factory preset with all voice features ON.
The volume of the voice prompt is regulated by the SLIDE VOLUME CONTROL.
If the user does not wish to hear the voice prompts, it can turn off the voice feature.
1. Press MENU BUTTON repeatedly (or press MENU then
 buttons) until “VOICE” is shown.
2. Press the DIAL BUTTON.
3. Using the  or  to select between VOICE OFF or ON and the desired language (English, Spanish, Italian,
French) and confirm with DIAL button.
4. Press
BUTTON to exit the setup mode.
Note: The default setting for voice prompt is English, if you select other languages, the phone will announce the
phone number, digits and phone Caller ID only.
SETTING THE FLASH TIME
1. Press MENU BUTTON repeatedly (or press MENU then
 buttons) until “FLASH” is shown.
2. Press the DIAL BUTTON.
3. Select the desired flash time from 600, 300 (default), 270, 100 or 80ms using the  or  and confirm by