T300 Table of Content 1. Layout & Function Descriptions of T300…..…….............................................2 1.1 Main Unit & Accessories......................................................................2 1.2 Features at a Glance.............................................................................3 1.3 Installation of SIM, SAM & Micro-SD Card………………..…………………….. 4 1.4 1.5 Battery Installation..............................................................................
T300 1.3 Installation of SIM, SAM & Micro-SD Card SAM Card SAM Card/ SIM Card (Optional) SIM Card (Optional) 1.
T300 1.5 Paper Feeding Procedure 1. Lift up the Paper Tray Lever 2. Pull the Paper Tray Lever backward 3. Place the paper roll into the tray as shown 4.
T300 2 How to Operate 2.1 Turn On/ Off Procedure . If the terminal is equipped with charging battery during first time use, please connect the power adaptor and charge the battery for 3 hours. key . On - Power is on whenever plugged. If the terminal is unplugged, press the for several seconds to turn on the terminal. When the terminal displays the application idle screen, it is ready for operation. . Off - Disconnect the power adaptor. Keep on pressing the seconds to turn off the terminal.
T300 3 Rechargeable Battery Safety Guideline 3.1 Prohibition: Improper handling of the Li-Polymer battery is hazardous, the following forbidden activities must be avoided: . DO NOT use NON-SPECTRA provided battery in SPECTRA POS Terminal . DO NOT use a charger that is not specifically designed to charge Lithium Polymer Battery . DO NOT operate the terminal, charge up or store the battery under high . temperature (under direct sunlight or inside a roasting vehicle) or close to heat source (fire, heater) .
T300 3.3 Terminal and Battery Storage Guideline . If the battery will not be used for a long period, please charge it to only 50% of the battery capacity (battery indicator displays half full, 2 units); remove it from the terminal and store in a cool place. This can minimize the life deterioration caused by self-discharge . DO NOT store bare battery together with metal, avoid humid and hot storage . During storage period, please recharge the battery once every 3 months 3.4 Accident Handling .
T300 4 Safety & Maintenance 4.1 Basic Safety Practice . While using T300 and its accessories, please follow the safety instruction to avoid fire, electric shock and personal injury. . Read this instruction in detail . Disconnect the power and accessories before cleaning, use dry flannelette and soft brush for cleaning . Do not put the terminal near water . Do not spray any liquid onto the terminal . For desktop purpose, put the terminal on stable platform to avoid damage by drop .
T300 power and accessories connection . Good ventilation and should have 22cm space around the pinpad . DO NOT expose the terminal in following environment ~ Near electrical appliance with high frequency EM wave such as air conditioner, electric fan, motor, neon sign etc. ~ Liquid container such as water trough, sink, pond etc.
T300 . Close the printer cover Send for repairing . If it is necessary to send back T300 for repairing, please contact agency, pack the terminal properly (use original packing material if possible) to avoid damage during transportation 4.5 Trouble Shooting T300 has been designed to provide stable service for users. However, there would be some minor problems during in use. Before sending back for repairing, users can try the following simple procedures to fix the problems themselves Terminal not function 1.
T300 5. The printer accepts thermal paper only, check whether the paper roll is the correct type, please refer to section 1.5 6. Check whether the paper is jammed or damaged. Try to open the printer cover and smooth the paper path. 7, Contact agency if problem cannot be solved Malfunction on magnetic card reader 1. Check whether the way of card swiping is correct, speed is normal, please refer to section 2.2 2. Try to swipe in opposite direction 3. Try to use another card 4.
T300 5 Other Information Dimensions & Weight Size: 166 (L) x 81(W) x 57H) mm (Excluded protruded part) Weight: 340g (Terminal with battery) Operating environment Temperature: 0°C - 45°C Humidity: 0% - 85% (non-condense) Power input DC 5.0V, 1.0A Message for product approval This product complies with the following standards .CE approval . FCC approval FCC ID: VWZT300 Hereby, SPECTRA Technologies Holdings Co. Ltd.
Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instruction. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.