User's Manual

power and accessories connection
. Good ventilation and should have 22cm space around the pinpad
. DO NOT expose the terminal in following environment
~ Near electrical appliance with high frequency EM wave such as air conditioner,
electric fan,motor, neon sign etc.
~ Liquid container such as water trough, sink, pond etc.
~High temperature or humidity place
~ High containing of VOC, salty and dusty area
~ Sunlight or high thermal radiation area
~ Near demagnetizing system and magnetic security system
4.4 Maintenance
T1000 has been designed to provide stableservice for users with less maintenance.
In order to ensure best performance, wesuggested the followings:
. Avoid exposing in sunlight, high temperature, high humidity and dusty area
. Keep in dry, clean and tidy environment
. Do not keep in extreme hot and cold place
. Do not disassemble the AC/DC power adaptor
. Do not impact and thrash the terminal heavily
. Do not disassemble the terminal (exceptopening the Battery Cover). Disassembling
willerase all data and lead to abnormal running
Cleaning of T1000
. Use flannelette to remove dust on terminal
. Use mild alcohol to remove stubborn stains
. If possible, use low pressure blower to blow out dust on keypad
. Use flannelette or lens cleaning paper toclean the display
Printer Cleaning
. Disconnect power cable from the terminal
. Open printer cover, take out paper and roller
. Remove dust and paper scrap inside paper tray . Use low pressure blower to clean the
paper tray if possible.
. Do not touch the thermal printer head andpaper cutter during cleaning
. Put back paper and roller into paper tray
. Close the printer cover
Installation Guide 10