Manual

Adding Receiver Profiles

• Tap the Instrument icon and select Switch to GNSS.

• Tap the Instrument icon and select Manage Instruments. This opens the

Settings screen listing the currently existing GNSS receiver profiles.

•Tap Add Receiver Profile, then use of the two procedures described below.

Example of Detected Receivers Adding Receiver Profiles Using Spectra Auto-Configure:

• Tap on the Start button in the Spectra Auto-Configure pane. Survey Pro then

scans automatically for new Spectra Precision GNSS receivers within

Bluetooth range. After a while, the screen lists the names of all the

detected receivers.

• Select each of the receiver for which you would like to add a receiver

profile.

Example of Selected Standard

Receiver Profiles

•Tap Next. Survey Pro will in sequence connect to each of the selected

receivers and will then return a list of standard receiver profiles, each of

them corresponding to a possible usable profile for that receiver.

• Check each of the receiver profiles you would like to add.

•Tap Finish. Survey Pro comes back to the Receiver Profiles screen on which

you can now see the added profile(s). Receiver profiles may be imported or

exported at this point (see Managing Your Receiver Profiles on page 23 for

more information).

• Tap to return to the Home screen.

Adding a Receiver Profile Using Manual Configuration:

Example of Serial Connection •In the Manual Configuration pane, do the following:

– Select the brand of your GNSS receiver

– Select the model of your GNSS receiver

– Select the type of connection to the receiver.

1) If it’s a Bluetooth connection, select Bluetooth and then tap the

Bluetooth Settings button. This button opens up the Bluetooth Instruments

screen, from which you can scan for Bluetooth devices supporting a

serial port service (or open up the Windows OS Bluetooth application).

Tap Start Scan and let the utility search for all the devices. When the

search is complete, select the device corresponding to your GNSS

receiver. Then tap Add Selected, change the Bluetooth name if you wish,

set the Bluetooth PIN if required,and tap .

Tap to return to the initial screen. The name of the chosen Bluetooth

device now appears in the Bluetooth Device field.