Instruction Manual

All the polylines in the current job are displayed. Select the appropriate polyline and tap .

Add/Edit Break-lines

[Job] [View DTM] [Breaklines…]

The Add/Edit Break-lines

screen is used to select, edit, create, or delete the break lines that will be used when

computing the DTM. The break lines that will be used when computing the DTM are listed in this screen.

[Edit…]: Opens the Edit Polyline

screen where the selected polyline can be modified or a new polyline can be

created.

[Delete…]: Move the selected polyline to the Auxiliary layer.

[Add Existing…]: Displays all the polylines in the current job. Selecting a polyline and tapping will move the

selected polyline to the DTM layer.

Note: If a boundary is defined, only polylines that fall within the boundary can be added.

[New…]: Opens the New Polyline

screen, which is identical to the Edit Polyline screen and is used to create a new

polyline.

Edit Polyline

[Job] [View DTM] [Break-lines] [Edit…] or [Job] [View DTM] [Break-lines] [New…]

The Edit Polyline

screen is used to perform some preliminary editing to a polyline prior to accessing the polyline

editor with the [Edit…] key.

[Tap Points…]: Allows you to tap points to define a new polyline. If a polyline was already selected prior to

accessing this screen, it will be replaced by the polyline being created.

[To / From…]: Allows you to define a range of points that define a polyline. If a polyline was already selected prior

to accessing this screen, it will be replaced by the polyline being created.

[Edit…]: Opens the Polyline Editor

where the polyline can be further edited.

[Clear]: Permanently removes the selected polyline from the job.

[Properties…]: Opens the New Line screen where the description, layer and feature attributes can be modified.

: Opens the Map Display Options screen to select what is displayed on the screen.

Points on DTM Layer

[Job] [View DTM] [Points…]

Survey Pro Help 5.00