Instruction Manual

remote benchmark. The New Elevation field of the Remote Elevation screen will then display the calculated elevation

for the base point to be set on tapping [Accept].

Import GNSS Control

[Survey] [Import GNSS Control]

The Import GNSS Control

wizard is used to merge an accurate NEE location (control point source) with a GNSS

collected point in the job file. This point will then be designated as a GNSS control point and can be used to solve a

calibration adjustment. Solving the calibration adjustment can be done automatically at the end of this wizard,

manually after the end of this wizard, or at a later time. There are three methods to import the control point source:

Import from an XML format ‘OPUS Solution Report’

Import from a text format ‘NGS Datasheet’ file

Key in a coordinate in NEE, LLH WGS84, or LLH local

Select Points and Import Source

The first screen is used to select the job points you want to merge with accurate NEE coordinates to convert to GNSS

control and select how you will enter the control point source to get the accurate NEE.

[To/From…]: Opens the Select Point(s) screen where you can select points by specifying a point range.

[Tap Points…]: Opens a map view where you can select points by tapping them on the screen.

Select a method…: Used to select from the following sources for accurate coordinates.

OPUS Solution Results .xml file

NGS Data Sheet .txt file

Key In Coordinate

[Next >]: Opens one of two possible screens depending on the choice made for the Select a Method… field in the first

screen.

Enter Control Coordinate – OPUS or NGS Data Sheet

The purpose of this screen is to pick a data sheet point or OPUS solution file to use as the control point source. This is

the second screen that appears when either OPUS Solution or NGS Data Sheet was selected in the first screen.

Point: Displays the name of the selected job point that the control point source will be merged into.

Search this directory…: Displays the path to look for OPUS .xml or NGS .txt files

[Browse]: Opens a new screen where you can select a different path to search for OPUS .xml or NGS .txt files. On

all .txt files in the specified directory are read and any valid data sheet points that are within 100 meters are then put

into the drop-down list below.

Select the RINEX file, or NGS data sheet point…: Allows you to select any valid data sheet point found from the

drop-down list.

[Details]: Opens a screen that lists the selected OPUS Solution Report or NGS data sheet point details.

[Next >]: Opens the final screen.

Survey Pro Help 5.00

128