Reference Manual Owner manual

Job Menu
R-83
3D View
Job View DTM 3D View….
The 3D View screen is used to view the DTM from any angle.
Settings : opens the 3D View Settings screen, described
below, where the information displayed in the 3D view
can be configured.
Volume : displays the total cut and fill volume between
the area that has been staked and a reference datum,
whose elevation is specified in the 3D View Settings
screen; or the total cut and fill between the area that has
been staked and the selected DTM.
Datum: displays the datum elevation set in the 3D View
Settings screen.
: Toggles to display or hide the point names and
descriptions.
: When this button is activated, dragging within the
3D View will result in the image being rotated to any angle.
: When the button is activated, dragging within the 3D View will
pan the image.