Reference Manual Owner manual

Job Menu
R-81
Note: If a boundary is defined, only polylines that fall within the
boundary can be added.
New… : opens the New Polyline screen, which is identical to the Edit
Polyline screen and is used to create a new polyline.
Edit Polyline
Job View DTM Breaklines… Edit… or
Job View DTM Breaklines… New….
The Edit Polyline screen is used to perform some preliminary editing
to a polyline prior to accessing the polyline editor with the Edit… key.
Tap Points… : allows you to tap points to define a new polyline. If a
polyline was already selected prior to accessing this
screen, it will be replaced by the polyline being created.
To / From… : allows you to define a range of points that
define a polyline. If a polyline was already selected prior
to accessing this screen, it will be replaced by the
polyline being created.
Edit… : accesses the Polyline Editor, described on Page
R-62, where the polyline can be further edited.
Clear : will permanently remove the selected polyline
from the job.
Properties… : opens the New Line dialog box where the
description, layer and feature attributes can be modified.
: opens the Map Display Options screen (Page R-437)
to select what is displayed on the screen.