Reference Manual Owner manual

Miscellaneous Screens
R-441
Map Display Options
From the Map View, tap
The Map Display Options
screen is used to configure the information
that is displayed in the Map View
.
Show Points: will show a dot for each point in view.
Smart Point Labels: displays only certain point labels
(name and description) when many points are grouped
together to reduce clutter.
Names: will show the point name for each point that is
in view.
Descriptions: will show the point description for each
point in view.
Show Lines: will show all the polylines that are on the
DTM layer
Show Basemaps: will display any basemaps selected for
the current job.
Show Only This Layer: When checked, will show only the selected
point data that exists on the specified layer. When unchecked, point
data from all layers is displayed.
Manage Layers… : opens the Manage Layers screen (Page R-85)
where the layers can be configured.
Manage Basemaps... : opens the Manage Basemaps screen, described
below, where basemaps can be added to the current job.
Save as Default Display Options: When checked, will save the
selections made to this screen as the default selections.