Reference Manual Owner manual

Survey Pro Reference Manual
R-426
Point / Location : allows you to enter either a point name or
location coordinates.
Solve : adjusts the selected points in the same direction or distance
as defined from the From point to the To point, or by the direction and
distance entered.
Rotate
Adjust Rotate.
The Rotate screen will rotate selected points around a specified point.
This is useful to correct a survey where an incorrect backsight was
used during data collection.
Tap Points… : allows you to select points by tapping
them from a map view.
To/From… : allows you to select points by typing in a
point range.
Rotation Point: The selected points will be rotated
around the point specified here. (The coordinates for the
rotation point will not change.)
Simple Angle: When selected, this allows you to enter
the deflection angle to rotate the selected points.
Old and New Azimuths: When selected, this allows you
to enter an old and new azimuth, which is used to
compute the angle to rotate the selected points.
Note: The choice made from the two options above determines which
fields will be available below.
Rotate: is the angle to rotate the selected points around the Rotation
point.