Reference Manual Owner manual

Adjust Menu
R-425
Translate
Adjust Translate.
The Translate screen will move a group a points horizontally and
vertically by a specified distance and direction.
Tap Points… : allows you to select points by tapping them
from a map view.
To/From… : allows you to select points by typing in a
point range.
; Translate by Coordinates: When checked, all of the
selected points will be adjusted in the same direction and
distance as between a specified From point or location
and a To point or location. When unchecked, the selected
points will be adjusted by the specified direction and
distance. The choice made here determines the options
available below.
Note: The choice made above determines which fields
will be available below.
Azimuth / Bearing : is the direction to move the
selected points.
Horizontal Distance: is the horizontal distance that the
selected points are moved.
Vertical Distance: is the vertical distance that the
selected points are moved.
From: is where the first point or location is defined that
is used to compute the direction and distance that the
selected points are adjusted.
To: is where the last point or location is defined that is
used to compute the direction and distance that the
selected points are adjusted.