Reference Manual Owner manual

Survey Pro Reference Manual
R-402
Road Alignment Properties Screen
Roads Edit Roads ( New… or Edit… ) Road Set POB….
The Road Alignment Properties screen is used to change information
about the current alignment.
Description: is the name of the current alignment. A
new name can be assigned to the alignment from this
field.
Point / Location : depending how this button is
toggled, you can change the POB of the alignment by
entering a new point number or new coordinates.
Start Station: replaces the existing starting station of
the alignment with the starting station entered here.
The Templates Card
Roads Edit Roads ( New… or Edit… ) Templates.
The Templates card of the New Road screen is used to add existing
templates to the road.
The screen displays a list of left and right templates that
are currently assigned to the road. When a particular
template is selected, a cross-sectional profile view of the
selected template is displayed and an overhead view
shows where the selected template occurs on the
alignment.
Add… : When a template or <End> is selected from the L
or R columns in the Templates card, this button opens
the Add Template
screen, which allows you to add a new
template to the same side of the road that was selected.
Edit : allows you to edit the selected template in the
Edit Template screen, which is identical to the Add
Template screen.
Remove : removes the selected template from the list.