Reference Manual Owner manual

Curve Menu
R-391
Results
Station: is the current station.
Deflection: is the horizontal angle to the current station as if
occupying the TS and backsighting the Spiral PI.
Long crd.: is the chord length from the TS to the current station.
Short crd.: is the chord length from the previous station to the
current station.
Traverse on Spiral
Curve Spiral.
The Traverse on Spiral screen is used to compute the location of, and
optionally store the SC, or ST and spiral PI points.
Radius: is the radius of the circular curve.
Length: is the length along the spiral curve from TS to
SC.
TS / CS Point: is the existing point associated with the
TS or CS point.
Azimuth / Bearing : is the tangent direction at the
TS or CS point.
TS->SC: specifies that the curve starts at the tangent to
spiral and ends at the spiral to curve.
CS->ST: specifies that the curve starts at the curve to
spiral and ends at the spiral to tangent.
Right / Left: specifies is the curve turns toward the right
or left as you face the spiral from the TS or CS.
; Store SC / ST: When checked, saves a point for the computed SC
point.
; Store PI: When checked, saves a point for the computed spiral PI.