Reference Manual Owner manual

COGO Menu

R-357

Solve : computes the offset points, and stores them if the Store Pts

checkbox is checked.

Station Offset

Cogo Station Offset.

The Station Offset screen will compute and optionally store a point at

a specified station and offset to an existing polyline or alignment.

The elevation for the stored point will always be set to the elevation

of the first node of the polyline, or alignment.

Start Station: is the station for the first node of the

selected line.

Station: is the station on the line where you want to

compute an offset point from.

Offset: is the offset distance that is to the left (when

is selected) or right (when

R is selected) from the

selected line.

; Store Pts: When checked, will store the computed

offset point with the name specified in the corresponding

field.

Tap Line… : opens a window where any polyline or

alignment in the current job can be selected.

To/From… : opens a window where a new line can be

defined by entering a range of points.

Solve : computes the location of the offset point and optionally stores

the point.