Reference Manual Owner manual

Stakeout Menu – GPS & Basic GPS Module
R-339
Show Station – Screen Two
Once the line is selected, the second screen is opened where
information is displayed about the rod position and the selected line.
GPS Status: displays the current solution type, the number of
satellites used, and the horizontal and vertical precision computed by
the receiver. Tap on this button to open the detailed GPS Status
screen (Page R-168).
OCCUPYING / ROVING : switches from ROVING to
OCCUPYING mode. When ROVING, the receiver is in
dynamic mode and will calculate your position as you
move to the point. When OCCUPYING, the receiver is
switched to static mode (depending on settings) and will
calculate the most precise position for the staked point.
Results / N,E,Z : displays either the results, or
plane coordinates in the lower corner of the screen.
Station: is the station at the current rod position.
Offset Dist: is the perpendicular distance from the line
to the rod.
Elev: is the elevation at the rod position.
Offset: displays if the rod is on the Left or Right of the
line.
Segment: displays the type of line segment at the current station.
< Back: returns to the previous screen.
Store : stores a point for the current rod location.