Reference Manual Owner manual

Stakeout Menu
R-313
Store Offset Points – Screen Two
The second Store Offset Points screen is used to define the road
profile, or offset distances that will be used to compute the offset
point coordinates.
1/2 Road Width: is the Left and Right width of the road,
respectively, from the centerline to the edge of payment.
X-Slope (%): is the Left and Right slope of the road,
respectively, from the centerline to the edge of payment
calculated from
100
Run
Rise
⋅ .
Note: A negative slope will result in water running from
the centerline toward the edge of payment.
; Stake Curb / Ditch: When checked, a curb or ditch
and an offset can be defined beyond the edge of the
pavement.
Height: is the height of the curb or ditch in feet or meters. A positive
value is considered a curb and a negative value a ditch.
Offset From Edge of Road: is the distance that the curb or ditch
extends from the edge of pavement.
Note: The specified curb or ditch height and offset will be applied to
both sides of the road.
< Back : returns to the previous screen.
Next > : accesses the next screen.