Reference Manual Owner manual

Survey Pro Reference Manual
R-302
Stake Curve and Offset
Stakeout Curve and offset.
The Stake Curve and Offset screen is used to stake stations on a
curve or at an offset to it at fixed station intervals.
PC Point: is the starting point of the curve (point of
curvature).
PC Tangent Azm / PC Tangent Brg : defines the azimuth
or bearing, respectively, of the tangent at the PC Point.
Radius / Degree Arc / Degree Chord : defines the
radius, degree arc, or degree chord of the curve,
respectively.
Turn: defines if the curve turns to the Left or Right from
the point of view of the PC.
Begin Station: is the station assigned to the PC Point.
Backsight… : accesses the Backsight Setup screen (Page
R-114).
Next> : takes you to the second Stake Curve and Offset screen,
described below.
: accesses the Stakeout Settings screen (Page R-45).