Reference Manual Owner manual

Stakeout Menu
R-293
Store CP : stores the point.
Offset from CP: This field is used if you want to stake another
location that is at the specified horizontal distance from the catch
point away from the road.
Solve > : opens a new screen, described next, used to stake the point
at the offset specified above.
< Back : returns to the previous screen.
Next CP > : returns to the third slope staking screen where the
station to stake can be advanced and the next catch point can be
located.
Slope Staking Offset Stake
The following screen is only accessed if you choose to stake a point at
a specified offset away from the catch point.
Station: displays the current station being slope staked.
Offset from CP: is the offset from the catch point
specified in the previous screen.
From Gun to Design Point: displays the angle and
distance information from the total station to the design
point.
Circle Zero : is used to modify the circle on the total
station so that the angle right reading will be zero when
it is facing the current target, which can sometimes be
easier than turning to an obscure angle value. When
this button is tapped, the following actions will occur:
1. A new backsight circle value is computed, sent to
the instrument and stored in the raw data
2. The Angle Right value is changed to zero to reflect the change.
The instrument now needs to be turned horizontally to zero to
face the current target location.
3. To prevent errors if this button is used, the backsight set up
is invalidated when exiting the Stakeout
dialog. A circle